Instrument & General Mountings

  • Low Frequency Mount

    Low Frequency Mount

    High performance mountings for lightweight equipment. They are designed to give high levels of deflection under light loads, providing a low natural and high levels of vibration isolation – both Active & Passive. They can be used in either compression, shear or a combination.

    High Temperature & Oil Resistant Rubbers available on request.

    Applications:
    ■ Precision Equipment
    ■ Sensitive Instruments
    ■ Lightweight Machines
    ■ Medical Equipment
    ■ Sensors & Gauges

  • UU Shear

    UU Shear

    UU Shear mountings are designed to load the rubber in shear and thereby provide a soft vertical spring rate and high levels of vibration absorption. They are also suitable for absorbing shock. They fall within two distinct ranges, those that have zinc plate metals and those that have the metals fully encapsulated in rubber.

    Applications:
    ■ Small Generators
    ■ Fans
    ■ Sensitive instruments & Apparatus
    ■ Low Speed Machines
    ■ Shock Protection

  • Angle Mount

    Angle Mount

    Angle Mountings are used in pairs – diametrically opposite to give a low roll frequency and hence improved vibration isolation whilst maintaining good stability of the equipment.

    Applications:
    ■ Portable Generators
    ■ Compressors
    ■ Pumps

  • W Mount

    W Mount

    W and V type mountings are ideal for use in both compression and shear. The profile of the rubber section allow for high levels of deflection to be achieved at low loads.

    Advantages:
    ■ Ideal for Lightweight Equipment
    ■ Protect Sensitive Equipment from Shock
    ■ Easy to Install

    Applications:
    ■ Small Generators
    ■ Slow Speed Machines (Fans etc)
    ■ Electronics
    ■ Shock Protection Units

  • V Mount

    V Mount

    W and V type mountings are ideal for use in both compression and shear. The profile of the rubber section allow for high levels of deflection to be achieved at low loads.

    Advantages:
    ■ Ideal for Lightweight Equipment
    ■ Protect Sensitive Equipment from Shock
    ■ Easy to Install

    Applications:
    ■ Small Generators
    ■ Slow Speed Machines (Fans etc)
    ■ Electronics
    ■ Shock Protection Units

  • SF Mounting

    SF Mounting

    A general purpose and versatile anti-vibration mounting which can be used in a variety of different applications. The circular relief within the rubber section enables the SF mountings to provide good levels of vibration attenuation and shock absorption.

    Applications:
    ■ Diesel engines
    ■ Pumps
    ■ Compressors
    ■ Motors
    ■ General industrial machinery

  • Cup Shock Mount

    Cup Shock Mount

    Cup Shock mountings are a relatively stiff product, ideal for applications where high frequency vibrations are predominant. The product is failsafe and ideal for both mobile and static applications. The outer metal cap offers protection from contaminants such as Oil and Fuel. The design of the mounting also allows the product to be used in tension, although maximum loads should be derated.

    Advantages:
    ■ Failsafe Design
    ■ Ideal for High Frequency Vibration
    ■ Excellent Shock Absorption
    ■ Can be used in Compression or Tension

    Applications:
    ■ Military Equipment
    ■ Electronics
    ■ HVAC
    ■ Motors & Compressors

  • Plate Mount

    Plate Mount

    Plate & Pedestal mountings are ideal for lightweight equipment due to their low stiffness. They are available as either a “Plate Mounting” or “Pedestal Mounting” option, and can be made failsafe by fitting top and bottom washers.

    Applications:
    ■ Control Panels
    ■ Sensitive Instruments
    ■ Radiators
    ■ Marine Equipment
    ■ Fans
    ■ Blowers

  • Pedestal Mount

    Pedestal Mount

    Plate & Pedestal mountings are ideal for lightweight equipment due to their low stiffness. They are available as either a “Plate Mounting” or “Pedestal Mounting” option, and can be made failsafe by fitting top and bottom washers.

    Applications:
    ■ Control Panels
    ■ Sensitive Instruments
    ■ Radiators
    ■ Marine Equipment
    ■ Fans
    ■ Blowers

  • Suspended Mount

    Suspended Mount

    The Suspended Mountings are ideal for hanging or suspending equipment from walls, vertical surfaces, ceilings or supporting structures. The HNG Upper is used to accommodate tensile mounted loads at the top fixing of the equipment, whilst the HNG Lower is used to accommodate the compressive loads at the bottom of the equipment.

    Advantages:
    ■ Fail Safe Design
    ■ Easy to Install
    ■ Suspends from Ceilings & Walls

    Applications:
    ■ HVAC
    ■ Ducting and Pipework
    ■ Instrument Cabinets
    ■ Control panels